FAQs
Commercial Resin Solutions Questions
Every question we get asked about commercial resin solutions, answered straight.
Questions
How It Works
How thick does the sub-base need to be for a commercial car park?
Commercial installations typically require a sub-base of 150-200mm compacted MOT Type 1, deeper than the 100mm used for residential work. The exact depth depends on the site’s soil type, expected vehicle loads, and freeze-thaw movement, the installer specifies this in the written quote after assessing the site.
What happens if the drainage spec is skipped on a sloped site?
Without a SUDS-compliant void ratio and drainage fall, snowmelt concentrates at low points, saturates the sub-base, and accelerates freeze-thaw damage. On a commercial slope, that means surface heave and edge failure within one to two winters, repairs cost significantly more than getting the drainage right at installation.
Does resin-bound paving meet Colorado stormwater requirements for commercial sites?
A correctly specified permeable resin-bound surface can satisfy local stormwater management requirements by allowing water to drain through the surface rather than run off. The installer confirms the void ratio and drainage fall against the site’s specific requirements before work begins.
How does high-altitude UV affect the resin binder?
Front Range elevation delivers UV intensity that exceeds the lowland ratings most manufacturers publish. A UV-stable aggregate and commercial-grade binder are specified to prevent chalking, color shift, and binder breakdown that would shorten the surface’s service life at altitude.
Can hydronic snow melt be added to an existing resin surface?
Retrofitting hydronic snow melt under an existing resin surface requires breaking out the current installation, which is costly. It is far more practical to specify the heating system and the resin surface together so the sub-base depth and drainage are designed around both from the start.
How long does a commercial resin surface last under heavy traffic?
A correctly specified commercial resin-bound surface with a reinforced sub-base typically lasts 15-25 years under regular vehicle loads. Surface life depends on sub-base quality, resin grade, and drainage performance, all three are itemized in the written quote before any work is scheduled.
Tell Us About Your Slope
Every enquiry receives a written quote itemizing base preparation, resin formulation, aggregate blend, and snow melt integration before any work is scheduled.